June 2, 2006on a chrysler 727 trans, other than the pan, where & how can i install the sending unit for an electric trans temp gauge.
Forums : Transmissions : Temp gauges (3357 Views)
Subscribers : moparmanpr
January 28, 2007You can install a manifold into one of your tranny lines. There's a sending line and a return line. If I remember correctly then the manifold goes into the return line where the tranny fluid is coming out of the tranny(hot fluid) and is going back to the tranny cooler/radiator. Hope that helped you out some.
June 12, 2012I hooked up a under the dash gauge for water temperature and the sending unit in the water pump for my 440 68` Dodge Coronet. I would like to hook the gauge up for the dash again.....my question is where can I put the sending unit for this. The sending unit for the Autometer(under the dash)unit is different than the dash unit. Any ideas where I could place another sending unit in the 440?
chrysler auto parts